Straw forming machine for sale in Cape Down

Straw forming machine

【Power】Please call us or consult online

【Yield】Please call us or consult online

Application materials

Straw forming machine

Corn straw, wheat straw, cotton stalk, rice straw, rice husk, peanut shell, corn cob, branches, leaves, sawdust and other crops

Before and after treatment

Straw forming machine before and after treatment

Online

24-hour hotline:+86-021-61319666

Product introduction

Introduction
Straw forming machine uses rural corn straw, wheat straw, cotton rod, straw, rice husk, peanut shell, corn cob, branches, leaves, sawdust and other crops, solid waste as raw material, after crushing, pressuring, forming, finally produce the raw material to “straw coal”.
Straw forming machine working process
Straw forming machineFirst crush the more than 600mm material with chaff cutter or crushing machine, the material particle size and water content should between the specified range; then send the material evenly into the upper month of the Straw forming machine by feeder (belt conveyor) or manual, pressure it,then we get the final product.
From the source of raw materials to the use of fuel flow process: material recovery → cutting→ Automatic feeding and removing the metal →pressuring →forming →discharging →cooling →transport→home use,small boiler →Biomass power plant
specification

Model Power(kw) Capacity(kg/h) Product Size and shape Product density(g/cm3) Moisture(%) Feeding size(mm) Dimension (mm) Total weight(T)
HMK1000 15 700-900 32×32 cylinder 0.8-1.4 10-25 3—50 2000×800×1400 1.2
HMK2000 22 1200-2000 32×32 cylinder 0.8-1.4 10-30 3—60 2000×900×1660 1.8
HMK3000 30 2200-3000 33×33 cylinder 0.8-1.4 10-30 3—60 2500×1100×2000 2.2

Material adaptability:
Adapt to a variety of biomass raw materials molding, size from the powder to 60mm length, water content between 5% – 30%, can be processed.
Electric heating function: automatic electric heating device, can adjust the humidity of materials to solve the material blockage and not forming problem.
Pressure wheel automatic adjustment function: use thrust bearing two-way rotation principle, automatic adjust the pressure angle, so that the material does not squeeze, not blocking, to ensure the stability of the material forming.
Easy to use: high automation,less labor, only 3 people, manual feeding or conveyor feeding are both OK.
Grinder durable: the mold adopt special steel plus special wear-resistant materials,it can use for three years without replacement.
High Performance and cost-effective ratio: improved the machine’s technology content and functionality on the basis of similar equipment.
Performance characteristics:
Straw forming machine Performance:
1,high automation, high yield, low price, low power consumption, simple operation, easy to move, if no power facilities can use diesel engine instead.
2, the material adaptability: Adapt to a variety of biomass raw materials molding, size from the powder to 60mm length, water content between 5% – 30%, can be processed.
3,Electric heating function: automatic electric heating device, can adjust the humidity of materials to solve the material blockage and not forming problem.
4.Pressure wheel automatic adjustment function: use thrust bearing two-way rotation principle, automatic adjust the pressure angle, so that the material does not squeeze, not blocking, to ensure the stability of the material forming.
5.Easy to use: high automation,less labor, only 3 people, manual feeding or conveyor feeding are both OK.
6, the process: crushing → transport → molding → finished product storage.
7.power consumption
1. HMK1000 type straw briquetting machine, 1 ton / hour, power 15 kw.
2. HMK2000 type straw fuel molding machine, 2 tons / hour, power 22 kw.
3. HMK3000-type straw coal molding machine, 3 tons / hour, power 30 kw.